Product Information
Description: Water based, very low to no VOC’s single package. Water Soluble Paint you can spray over almost any surface.
Uses: AnoColor is unique in it’s ability to be airbrushed or spray painted over plastics, glass or shiny metal surfaces painted and then removed, without permanent discoloration. AnoColor in most cases, although not recommended, can be applied without masking and any overspray can be washed off or removed before dry with a wet rag. Uses include Arts and Craft, Hobbies, Household, Automotive and more.
Appearance: AnoColor has a translucent Aluminum Color Anodized like appearance that is supplied ready to use in more than 30 different colors as well as Black, Silver, Metallic, Fluorescent and Pearl Colors.
Physical Properties:
| Weight per gallon | 10.1 | |
| Solids by weight | <0.1% | |
| Theoretical Coverage | 1.0 mil @ 0.25 mil Approx. 1.0 sq. ft. / fluid oz. Assuming 10% material loss | |
| Dry Time | @ 70˚F – 80˚F 15-30 min. | |
| Recoat | @ 70˚F – 80˚F 5-10 min. | |
| Fully Cured | 8 Hours | |
| Heat Cured | 5 min. @ 150˚F-300ºF | |
| Dry Heat Resistive | >500˚F | |
| Shelf Life | 1 Year | |
| Packaging | 2oz, 8oz, 17oz and 1gal |
Surface Preparation:
General: Quality paint jobs occur with quality preparation. Quality preparation includes cleaning the surface to be painted to remove all containments. In laboratory tests, AnoColor was also tested by being applied to slightly soiled oily surfaces, which resulted in satisfactory results with even color over large surfaces. However, we always recommend that surfaces be cleaned as well as possible. Aluminum Steel or Plated Chrome surfaces should have rust, grease, dirt, oil and loose paint removed. We recommend washing with a cleaner/degreaser. Window cleaner or Isopropyl Alcohol can also be used.
Application:
Apply only when air and surface temperatures are above 60˚F and surface temperature is at least 5˚F above the dew point. High humidity and wet hands will remove or damage the freshly painted and/or water soluble painted surface.
Curing can take hours, even weeks to reach maximum durability. Remember AnoColor was formulated not to be permanent and is meant to be removed.
Thinning:
Distilled water. Thinning may be required to suit the paint equipment used.
Clean Up:
Fresh Water.
Removal:
Fresh Water for WS Paint and/or AnoColor Remover
Equipment: (Recommendation)
| Air atomized spray | Follow equipment manufacturer nozzle and needle selection recommendation for use. | |
| Hot Spray | Heat AnoColor in the microwave to 100˚F – 120˚F do not exceed 120˚F at any time (this is only required if sprayed in freezing conditions, however surface to be painted could also be heated for faster drying and less running of paint). |
Safety Information:
| VOC: | <1lbs per gallon less water, 200gr / lit less water | |
| Flash Point: | Non-Flammable | |
| Warning | For external use only. Do not ingest. Not to be used on skin.
Close containers tightly after use and keep upright and out of reach of children. Children under the age of 16 should be supervised by an adult referred to by Parent or Guardian”. In case of spillage, absorb and dispose of in accordance with local acceptable regulations. Small volume hobby or arts and crafts spills can be absorbed with paper towels and disposed of. |
For specific information download and refer to the MSDS sheet.
